Adjustments and settings
Stitch length
It can be adjusted while sewing. The stitch length is innitely variable
from 1-4mm. Most overlock work is done with a basic setting of 2.5mm.
Cutting width
• Switch the machine off (Power switch to “0”).
• Open the cloth plate. Raise presser foot.
• Push upper knife to the right and turn cutting width dial in the direc-
tion desired.
• Close cloth plate cover and lower presser foot.
Cutting width:
1 = 3 - 5 mm seam width
2 = 4 - 6 mm seam width
3 = 5 - 7 mm seam width
The position of the lower knife determines the width of the seam.
Reduce cutting width (knife moves to the left) if the edges of the fabrics
curl up (A).
Increase the cutting width (knife moves to the right) if the loops are too
loose (B).
A B
19
To Next Page
Loading...
Need help?
General
