3 Function
System information
By statute, the reception characteristics and the antenna cannot be changed.
The device may be operated in all EU and EFTA countries.
The declaration of conformity can be viewed on our website.
The range of a radio system from the transmitter to the receiver depends on various
circumstances.
The range of the system can be optimised by selecting the optimal installation location, taking
into account the structural circumstances.
Figure 2: Reduced range due to structural obstacles
Example of penetration of various materials:
Material Penetration
Wood, plaster, plasterboard approx. 90%
brick, chipboard approx. 70%
Reinforced concrete approx. 30%
Metal, metal grid approx. 10%
Rain, snow approx. 1-40%
Intended use
- Radio transmitter for transmission of switching, dimming, blind movement and light scene
commands
- Surface-mounted
- Operation with suitable radio actuators
Product characteristics
- Each two opposite buttons belong to one channel
- Functions can be set with 3gang function switch
- Special functions "All Off" or "Light scene" can be assigned to individual buttons
- Battery-powered device
2/8
32532713
J:0082532713
09.12.2010
Radio Management
Flat wall-mounted radio transmitter
To Next Page
Loading...
Need help?
General
