To Next Page

To Previous Page

• Five fan modules

• Management interface ports: RJ-45 console (CON) port, RJ-45 management Ethernet port (CO), SFP

management Ethernet port (C1), and a USB port

• Two expansion slots for oponal expansion modules

The EX4600 is available in AC-powered or DC-powered models with air-ow in or air-ow out cooling.

You can install the switch in a two-post or four-post rack. In this guide, we show you how to install an

AC-powered EX4600 in a four-post rack. If you need instrucons for installing a DC-powered EX4600,

see the EX4600 Ethernet Switch Hardware Guide.

Install the EX4600

IN THIS SECTION

What’s in the Box? | 2

What Else Do I Need? | 3

Rack It | 3

Let’s get going and install the EX4600 in a four-post rack.

What’s in the Box?

• EX4600 switch with two power supplies and ve fan modules pre-installed

• Two power cords appropriate for your geographic locaon

• Rack mount kit

The rack mount kit contains one pair of mounng rails, one pair of mounng blades, and 12 at-head

Phillips mounng screws.

Juniper EX4600 User Manual

Other manuals for Juniper EX4600