Jura ENA Micro 9 One Touch User Manual

18
4 Permanent settings in programming mode
4 Permanent settings in
programming mode
Products
J WARNING
Hot coffee, hot steam and hot water can cause
scalding. Scalding is a serious burn.
T Use extreme care when handling hot liquid
or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area
with cold water and seek medical attention.
T Keep children AWAY.
You can make the following permanent settings for
espresso and coffee:
U
Amount of water: 0.5OZ – 8.0OZ
(25 ml – 240ml) (per cup)
U
Coffee strength: NORMAL, STRONG
U
Temperature: NORMAL, HIGH
(approx. 176–205 °F (80–96 °C))
You can make the following permanent settings for
latte macchiato and cappuccino:
U
Amount of milk foam: 3SEC – 120SEC
U
Interval: 0SEC – 60SEC
U
Coffee strength: NORMAL, STRONG
U
Amount of water: 0.5OZ – 8.0OZ
(25 ml – 240ml)
U
Temperature: NORMAL, HIGH
(approx. 176–205 °F (80–96 °C))
You can make the following permanent setting for
hot water:
U
Amount of water: 0.5OZ – 8.0OZ
(25 ml – 240ml)
Permanent settings in programming mode always
follow the same model.
Example: Permanently change the coffee strength
(
FLAVOUR) for espresso from STRONG to
NORMAL.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
program item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings.
No product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
g T Turn the Rotary Switch until FLAVOUR is
displayed.
k T Press the Rotary Switch to enter the
program item.
STRONG
g T Turn the Rotary Switch until NORMAL is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is set.
FLAVOUR
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the program
item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E If you are using the CLEARYL Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.

Jura ENA Micro 9 One Touch Specifications

General

Type	Coffee
Dimensions (WxDxH)	230 x 445 x 323 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.1 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Cord length	1.1 m
Product color	Stainless steel
Multi beverage	No

Weight and Dimensions

Depth	445 mm
Width	230 mm
Height	323 mm
Weight	9400 g