Jura ENA Micro 9 One Touch User Manual

21
5 Maintenance
pt
es
nl
it
fr
ru
en
de
Language
In this program item you can set the language
used by your ENA.
Example: Change the language from
ENGLISH
to
DEUTSCH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
program item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is set.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
BEREIT
5 Maintenance
J WARNING
Use of maintenance products that are harmful to
health and discharge of liquids during mainte-
nance program. Harmful if swallowed. Irritating to
eyes and skin.
T Keep children AWAY.
T Keep children away from the machine while
it is performing a maintenance program.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T When using do not eat or drink.
T Keep maintenance products away from food,
drink and animal food.
T Keep container tightly closed and dry. Keep
in a cool place.
Your ENA has the following integrated
maintenance programs:
U
Cappuccino frother cleaning (C-CLEAN)
U
Rinsing the machine (RINSE)
U
Cappuccino frother rinsing (C-RINSE)
U
Cleaning the machine (CLEAN)
U
Changing the filter (FILTER)
U
Descaling the machine (DE-SCALE)
E You can start the maintenance programs at
any time in programming mode (program
item
RINSE). If no action is taken in this
program item, programming mode is exited
automatically after approximately 5 seconds.
Rinsing the machine
You can initiate the rinse operation manually at
any time.
Precondition:
READY is displayed.
T Place a receptacle under the dual spout.
k T Press and hold the Rotary Switch until
RINSE appears.
k T Press the Rotary Switch to enter the
program item.
C-CLEAN
g T Turn the Rotary Switch until RINSE is
displayed.
k T Press the Rotary Switch to initiate the rinse
operation.
RINSING, the system rinses itself.
The operation stops automatically.
READY
micro 9

Jura ENA Micro 9 One Touch Specifications

General

Type	Coffee
Dimensions (WxDxH)	230 x 445 x 323 mm
Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.1 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Cord length	1.1 m
Product color	Stainless steel
Multi beverage	No

Weight and Dimensions

Depth	445 mm
Width	230 mm
Height	323 mm
Weight	9400 g