45
Initial Setup
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
ENU button
π†
To DIGITAL-IN
è
To enter
è
To select SIZE1 or SIZE2
Press the MENU button to finish
Note:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
Digital-In
This feature is used if you have a DTV or HDMI
compatible component connected to your TV.
Press the MENU button
π†
To DIGITAL-IN AUDIO
è
To select “ANALOG” or “DIGITAL”
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.
• Refer to your DTV or HDMI component’s instruction manual for more information.
Digital-In Audio
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
SIZE1
DIGITAL
LCT1827-001B-A ENG 45 7/25/05, 9:13:31 AM
To Next Page
Loading...
Need help?
General
