53
Button Functions
You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the SWAP button.
Freeze
Swap
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT
will shift the channel.
Select
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this
function will cancel out.
Pressing the FREEZE button causes the screen to change to the split-screen display with the still
picture displayed on the right. In order to return to the normal display, press the F
REEZE button
once again.
LCT1827-001B-A ENG 53 7/25/05, 9:13:36 AM
To Next Page
Loading...
Need help?
General
