17
English
Using the Tuner
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically, or from
preset memory storage.
Before listening to the radio:
• Check that both the FM and AM antennas are firmly connected. (See page 4.)
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia, and some other areas use 9 kHz spacing, while Canada, the United States, and some other
Western Hemisphere countries use 10 kHz spacing.
To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down ¡ TUNING UP on the MULTI CONTROL. “AM --10” appears on the display.
To select the 9 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing
while holding down TUNING DOWN 1 on the MULTI CONTROL. “AM -- 9” appears on the
display.
Tuning in a Station
Press FM/AM on the Unit (or FM or AM on the Remote Control) to turn
on the radio.
The frequency of the previously selected channel appears on the display.
FM
AM
RM-SED702TXU REMOTE CONTROL
VOLUME
+
–
TAPE A
AUX
REC PAUSE
TAPE B
DIRECTION
REPEAT
SLEEP
SHIFT
TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGICPRO LOGIC
S.A.BASS
SOUND
MODE
DISC 1
CD
CONTROL
TAPE
CONTROL
DISC 2 DISC 3
FM MODE
/ ECHO
–+
REAR
LEVEL
–+
Display
Band display, Frequency display, Preset channel
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Number keys
FM
FM MODE
/ ECHO
DISC
DISC
DISC
PROGRAM
/RANDOM
REPEAT
EDIT
FM/AM
When TUNER is selected
as the source, the button
lights up.
MULTI CONTROL
SET
AM
MULTI CONTROL
Pressing FM or AM makes the
Remote Control ready for the
Tuner operations.
When the Unit is being operated
with the Remote Control, press
FM or AM first.
+
EN/CA-D702T[U]/f 98.4.15, 6:03 PM17
To Next Page
Loading...
Need help?
General
