3
English
Getting Started
Accessories
Check that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
Remote Control (1)
Batteries (2)
FM Wire Antenna (1)
AC Plug Adaptor (except for Argentina) (1)
If any of these items is missing, contact your dealer immediately.
Setting the VOLTAGE SELECTOR Switch
To avoid damaging the System, set the voltage before plugging in the Unit.
Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back panel of the
System. Use a screwdriver to rotate the selector so the number the arrow is pointed at is the same as
the voltage.
How to Put Batteries in the Remote
Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use
many of the functions of the System from
a distance of up to 7m (23 feet) away.
You need to point the Remote Control
at the remote sensor on the System’s
front panel.
R6P (SUM-3)/AA (15F)
DISC
DISC
DISC
PROGRAM
/RANDOM
REPEAT
EDIT
Remote sensor
EN/CA-D702T[U]/f 98.4.15, 6:01 PM3
To Next Page
Loading...
Need help?
General
