For users seeking to obtain a gamma curve that is more faithful to the original PQ curve
Our projectors have been adjusted to display the projector images on the screen in the optimal quality in the default
setting based
on the original PQ curve. For users who wish to obtain results more faithful to the original PQ curve, please
adjust manually with reference to the values below.
When clipping point is 400 nits
Picture Tone +5
Dark Level 0
Bright Level +7
When clipping point is 1000 nits
Picture Tone -7
Dark Level 0
Bright Level +7
When clipping point is 2000 nits
Picture Tone -9
Dark Level 0
Bright Level +7
When clipping point is 4000 nits
Picture Tone -13
Dark Level 0
Bright Level +7
* This product is designed for home use and we do not provide guarantee for commercial uses such as in mastering
work.
Reduces the jitter of Fast-moving Images (Motion Control)
Low Latency
For changing the low latency setting.
You are recommended to set to “On” for content requiring short latency such as games.
1
Press the [MENU] button to display the menu and select “Picture Adjust”"“Motion
Control”"“Low Latency”
Setting Description
Off Does not perform the low latency setting.
On Performs the low latency setting.
* “Clear Motion Drive” cannot be set when “Low Latency” is set to “On”.
* Even when “Low Latency” is set to “On”, delay will not become zero.
46
Adjust/Set
To Next Page
Loading...
Need help?
General
