Auto Pic.Mode Select
For configuring
“Picture Mode” when the video type switches automatically while “Content Type” is configured to “Auto”.
SDR(2D)/SDR(3D)
For configuring the “Picture Mode” to switch to automatically during input of SDR (2D) or SDR (3D) signal.
Setting Description
Last Setting Switches to the “Picture Mode” that was last configured when viewing SDR (2D)
or SDR (3D) content.
Natural Switches the “Picture Mode” automatically to “Natural”.
Cinema Switches the “Picture Mode” automatically to “Cinema”.
Film k l Switches the “Picture Mode” automatically to “Film”.
THX k Switches the “Picture Mode” automatically to “THX”.
User 1 to User 3 Switches the “Picture Mode” automatically to “User 1” to “User 3”.
HDR10
For configuring the “Picture Mode” to switch to automatically during input of HDR10 signal.
Setting Description
Last Setting Switches to the “Picture Mode” that was last configured when viewing HDR10
content.
Frame Adapt HDR Switches the “Picture Mode” automatically to “Frame Adapt HDR”.
HDR10 Switches the “Picture Mode” automatically to “HDR10”.
Pana_PQ Switches the “Picture Mode” automatically to “Pana_PQ”.
User 4 to User 6 Switches the “Picture Mode” automatically to “User 4” to “User 6”.
HLG
For configuring the “Picture Mode” to switch to automatically during input of HLG signal.
Setting Description
Last Setting Switches to the “Picture Mode” that was last configured when viewing HLG content.
HLG Switches the “Picture Mode” automatically to “HLG”.
User 4 to User 6 Switches the “Picture Mode” automatically to “User 4” to “User 6”.
HDMI 2 EDID
For changing the EDID mode of the [HDMI 2] terminal. Set to “A” under normal condition.
Images with resolution 1920x1080 or 3D or lower may not be displayed when some old devices are used.
In that case, connect to the [HDMI 2] terminal and set “HDMI 2 EDID” to “B”.
*
EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged
between devices.
59
Adjust/Set
To Next Page
Loading...
Need help?
General
