Picture Adjust
Content Type
Changes the available picture modes according to the type of content for viewing.
Æ “Setting the Picture Mode” (P. 28)
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ “Setting the Picture Mode” (P. 28)
More Settings
Changes the preconfigured “Picture Mode” setting.
Lamp Power
Switches the brightness of the lamp.
Setting Description
Low Brightness (low)
High Brightness (high)
0
The factory setting varies with the “Picture Mode”.
0
Continuous use at the “High” setting may cause the lamp to darken faster.
Aperture
JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls
the aperture dynamically according to the image information.
This technology enables viewers to enjoy video images with enhanced contrast.
Setting Description
Auto 1 Places emphasis on the gradation.
Auto 2 Image contrast is enhanced.
Manual Does not perform dynamic control.
Select this setting to perform adjustment manually.
*1 Manual adjustment is disabled in the “Auto 1” and “Auto 2” setting.
To perform adjustment manually, select “Manual”.
*2 When the
setting is changed to Auto after performing manual adjustment, the value set manually will be used as
the aperture value for Auto.
50
Adjust/Set
To Next Page
Loading...
Need help?
General
