MPC/e-shift k, MPC Level u q
You can enjoy natural, expressive images with a stronger sense of depth.
Æ “Adjusting Movies for Increased Detail and Sharpness (Multiple Pixel Control)” (P.
35)
8K e-shift k
Switches the display resolution.
0
Setting values: On (8K), Off (4K)
Graphic Mode
Switches the MPC setting.
It is recommended that this item be configured to “Standard” such as when viewing normal Blu-ray contents, and to
“High-res” such as when viewing 4K resolution contents.
0
Setting values: Standard and High-res
Enhance
For adjusting the high-frequency areas. Increasing the value enhances the definition for a sharper image quality.
0
Setting range: 0 to 10
Smoothing
For adjusting the low-frequency areas. Increasing the value enhances the blurriness of the image for a softer effect.
0
Setting range: 0 to 10
NR
Prevents noise from becoming too pronounced.
0
Setting range: 0 (weak) to 10 (strong)
Motion Control
For reducing the after-image, which occurs in a fast-moving scene.
Æ “Reducing the After-image of Fast-moving Images (Motion Control)” (P.
42)
Contrast
For adjusting the white level point to avoid clipping or over saturation.
0
Setting range: -50 (little difference in brightness) to +50 (large difference in brightness)
Brightness
For adjusting the black level point to avoid clipping or over saturation.
0
Setting range: -50 (darker) to +50 (brighter)
Color
For adjusting the color density of the video image.
0
Setting range: -50 (lighter) to +50 (deeper)
Tint
For adjusting the hue of the video image.
0
Setting range: -50 (reddish) to +50 (greenish)
50
Adjust/Set
To Next Page
Loading...
Need help?
General
