Selecting an Image Quality According to the
Video Type
Setting the Picture Mode
1
Press the [MENU] button to display the menu, followed by
using the
↑↓ keys to select “Content Type”. Next, press [OK]
Doing so enables selection of a picture mode that suits the content for viewing.
Item Description
Auto Switches the video type automatically according to the
input video system.
After switching
automatically, the picture mode switches to
the setting preconfigured in “Auto Pic.Mode Select”.
Æ “Auto Pic.Mode Select” (P. 59)
SDR Picture mode suitable for viewing SDR content.
HDR10 Picture mode suitable for viewing HDR10 content.
HLG Picture mode suitable for viewing HLG content.
Configuring the video type to “Auto” automatically switches Content Type
according to the input video system.
HDMI Packet Information Content Type
ST2084 HDR10
HLG HLG
Other than the above/Out of Range/No
Signal
SDR
28
Adjust/Set
To Next Page
Loading...
Need help?
General
