When the Following Messages Appear...
Message Description Action
0
No device is connected to the input
terminal.
0
The input terminal is connected but
there is no signal.
Input the video signals.
The video signal input is not supported
on this unit.
Input video signals that can be used.
(P.
91)
Indicates that the lamp needs to be
replaced soon.
To clear
the message, press the [BACK]
button on the operation panel of the
projector unit or the remote control.
Get ready a new lamp unit and replace
as soon as possible. Reset the lamp time
after replacing the lamp. (P. 72, 74)
80
Troubleshooting
To Next Page
Loading...
Need help?
General
