JVC EM42FTR User Manual

30
Channel Menu
Select Antenna / Cable
Select Antenna or Cable for the service connected to your TV.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 Press or to select “TV Mode”, then press or OK.
4 Press or to select “Antenna” or “Cable”, then press OK.
Scan Channels
Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly. See page 14.
1 Press MENU.
2 Press or to select “Auto Channel Scan”, then press or OK.
3 Press or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press
OK.
TV Mode
Auto Channel Scan
Partial Channel Scan
Find Channel
Channel Management
Digital MTS
Cable
English
Input
Picture
Audio
Setup
PIP
Closed Caption
Wide
Channel
Note: Auto scan may take 15 to 30 minutes to nd available channels.
Adjusting the Menu Settings

JVC EM42FTR Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	42 \
Display brightness	- cd/m²
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	6000000:1
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	CrystalMotion 120 Hz
3D	No
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	Dolby Digital
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	-
Product color	Black
Panel mounting interface	200 x 200 mm
Power consumption (standby)	- W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	195.58 mm
Height (with stand)	614.68 mm
Weight (with stand)	8001 g
Depth (without stand)	63.5 mm
Width (without stand)	957.58 mm
Height (without stand)	561.34 mm
Weight (without stand)	7203 g