Partial Scan Channels
You can partially scan for network signal within a specied range of channels.
1 Press MENU.
2 Press or to select “Partial Channel Scan”, then press or OK.
3 Press or to select “Scan Mode”, then press or OK.
4 Press or to select an option, then press OK.
• “Analog/Digital”: scan for both analog and digital channels
• “Analog”: scan for analog channels
• “Digital”: scan for digital channels
5 Press or to select “From Channel”, then enter a starting channel range.
6 Press or to select “To Channel”, then enter an ending channel range.
7 Press or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 Press or to select “Find Channel”, then press or OK.
4 Press or to select “Enter Channel”, then enter a channel.
5 Press to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 Press or to select “Channel Management”, then press or OK.
4 Press or , then press OK to mark the channels that you want to remove from the
Channel List.
5 Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn o after a preset amount of time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
