JVC Emerald Series User Manual

20
Basic Operations
Setup Wizard
The Setup Wizard will assist you with setting
up your TV for the rst time. Please follow the
instructions carefully.
Note: If you would like to setup over-the-air or cable
programming, make sure the antenna or cable TV system
is connected.
1 When you turn on the TV for the rst time, the
Setup Wizard screen will appear.
Select the menu language, then press OK.
Menu Language
Language Selection
Language:
English
Change Select Exit
OK INFO
2 Select the TV Mode, then press OK.
TV Mode options:
Retail Mode: Select this mode for in store
demo.
Home Mode: Select this mode for in
home mode.
TV Mode
Mode Selection
Mode:
Retail Mode
Change Select Exit
OK INFO
Previous Step
RETURN
Note: Retail Mode is for retailers only.
To exit Retail Mode, see page 18.
3 Select Time Zone, then press OK.
Time Zone
Select the Time Zone
Time Zone:
Alaska
Change Select Exit
OK INFO
Previous Step
RETURN
4 Set Daylight Saving Time “ON” or “OFF”, then
press OK.
Daylight Saving
Daylight Saving Selection
Daylight Saving:
On
Change Select Exit
OK INFO
Previous Step
RETURN
5 Select the TV service, then press OK.
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
Signal Type:
Cable
ChangeMove Select Exit
OK INFO
Previous Step
RETURN
Start Scan

JVC Emerald Series Specifications

General

Brand	JVC
Model	Emerald Series
Category	LED TV
Language	English