Recording Files (Continued)
Still Image Recording
Preparation:
•
Insert an SD card.
•
Open lens cover.
•
Open the LCD monitor to turn on the camcorder.
Slide the mode switch to select
# (still image) mode.
Press the SELECT PLAY/REC
button to select recording mode.
Press and hold the SNAPSHOT
button halfway.
The ? indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button fully
to take the photo/picture.
NOTES
•
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camcorder on again when using the battery pack, close the LCD
monitor and open the LCD monitor again. When using the AC adapter, perform any operation such as
zooming.
L To view the image you just recorded
Select A after shooting.
During the preview, you can delete the
image by selecting *.
L To change the picture quality
Change the settings in [IMAGE
QUALITY]. (Z pg. 61)
L To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE]. (Z pg. 61)
To Next Page
Loading...
Need help?
General