Manual Recording (Continued)
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
After performing “To Change to Manual
Recording Mode” (Z pg. 25)
1
Touch the MENU button.
2
Select [MANUAL SETTING].
3
Select the desired menu.
For details on each menu, see below.
4
Select the desired setting.
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
The menu disappears and the indicator for
the set function appears.
L To return to the previous screen
Select @.
L To quit the screen
Touch the MENU button.
Menus Settings: [ ] = Factory-preset
ADJUST BRIGHTNESS
Adjusts the brightness.
For ! mode
[AUTO]
: The brightness is adjusted automatically.
–6 to +6
:
Corrects the brightness within this range in increments of 1.
For # mode
[±0]
: The brightness is not adjusted.
–2.0 to +2.0 (EV)
: Corrects the brightness within this range in
increments of 1/3EV.
L To lock the exposure
When the menu disappears after you finish configuring the
setting, select [LOCK]. The C indicator appears.
FOCUS
Adjusts the focus.
[AUTO]: The focus is adjusted automatically.focus is adjusted automatically.
@ 9 : A : Adjusts the focus manually by using the touch sensor.
(When zooming, the subject will not go out of focus if you
adjust the focus at the telephoto (T) side before zooming to
the wide-angle (W) side.)
To Next Page
Loading...
Need help?
General