JVC EX-A10 User Manual

8
Preparation
Connecting the FM antenna (supplied)
7 When radio reception with the supplied FM
antenna is poor, or when using a communal
antenna
When using an antenna other than those supplied
with this system, refer to the operation manuals for
the antenna and converter for details of
connection.
When positioning the antennas, find the best
position for reception while listening to an actual
radio program (refer to “Listening to radio
broadcasts” (A page 18)).
Stretch out the FM antenna to the best position for
radio reception, and then fix the FM antenna with
adhesive tape.
Receiver
(rear panel)
FM antenna
Receiver
Antenna cord
(not supplied)
Outdoor FM
antenna
(not supplied)
Converter (not
supplied: compatible
with 300 C/75 C)
Coaxial cord
(not supplied)
Receiver
(rear panel)
Depending on the radio reception
conditions, an FM feeder antenna
(not supplied: compatible with
300 C) can be used. In this case, a
converter (not supplied) is required.
or
Communal
antenna terminal
EXA10[B].book Page 8 Thursday, August 4, 2005 10:01 PM

JVC EX-A10 Specifications

General

Impedance	6 Ω
RMS rated power	20 W
Equalizer	Yes
Volume control	Digital
Supported radio bands	AM, FM
Type	Home audio micro system
Speakers	2-Way, Bass-Reflex
Dimensions (WxDxH)	245 x 80 x 297 mm
USB 2.0 ports quantity	1

Weight and Dimensions

Weight	2700 g
Center speaker weight	3500 g
Center speaker dimensions (WxDxH)	143 x 243 x 257 mm