JVC FS-X3 Service Manual

1-8 (No.MB004)
SECTION 3
DISASSEMBLY
3.1 Main body section
3.1.1 Removing the rear cover
(See Figs.1 and 2)
(1) From the back side of the main body, remove the fifteen
screws A attaching the rear cover. (See Fig.1.)
(2) Remove the two screws B attaching the fan cover. (See
Fig.1.)
(3) Remove the rear cover and disconnect the power cord
from the connector CN900
on the power supply board of
the main body. (See Fig.2.)
(4) Remove the strain relief in the direction of the arrow. (See
Fig.2.)
Reference :
Before attaching the rear cover, pass the power cord through
the guide hole a on the rear cover. (See Fig.2.)
Fig.1
Fig.2
Rear cover
A A
A
A
B
B
Fan cover
A
Rear cover
Power
supply
board
Gurde hole a
Fuse
Strain
relief
Power cord
Fuse clip
CN900

JVC FS-X3 Specifications

General

Brand	JVC
Model	FS-X3
Category	Speaker System
Language	English