EN27
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override it and make
the adjustment manually. Manual exposure adjustment is
recommended in the following situations:
•
When shooting using reverse lighting or when the
background is too bright.
•
When shooting on a reflective natural background such
as at the beach or when skiing.
•
When the background is overly dark or the subject light.
1
Set the Power Switch to “ ”.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select “EXPOSURE” and
press it. The EXPOSURE Menu appears.
4
Rotate the MENU Wheel to select “MANU”, then
press it. The Menu Screen disappears and “00”
(exposure control level counter) appears.
5
To brighten the image, rotate the MENU Wheel
downward. The exposure control level counter
increases (maximum +06).
To darken the image, rotate the MENU Wheel
upward. The exposure control level counter
decreases (maximum –06).
6
Press the MENU Wheel in. The setting is complete.
The Menu Screen reappears with the highlight bar on
“
RETURN”.
7
Press the MENU Wheel in. The Menu Screen
disappears and the exposure control level counter
reappears to indicate the exposure is adjusted.
NOTES:
●
To return to the factory setting, select “AUTO” in step 4.
●
To re-adjust exposure, repeat the procedure from step 2.
00
–
06
–
06
+
06
Manual Exposure
Screen
To brighten the image
To darken the image
MENU Wheel
Power Switch
Exposure
control
level counter
To Next Page
Loading...
Need help?
General
