24 EN
LCD Monitor/Viewfinder Indications
You can make the LCD monitor/Viewfinder
indications appear/disappear.
1
PRESS IND.ON/OFF BUTTON
When you do not want the indications to
appear, press the IND.ON/OFF button for
longer than approximately 1 second. Certain
indications disappear.
Press again for longer than approx. 1 second to
make the indicaitons reappear.
NOTE:
It is impossible to make the tape running indicator
and warnings etc. disappear from the LCD monitor
or the viewfinder. For the indications that can be
removed,
Z
pg. 79.
90 min
REC
89 min 3 min 2 min
1 min0 min
Tape Remaining Indicator
The time remaining on the tape is automatically monitored and displayed (Z pg. 79). When the tape ends,
“TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining
time reaches 2 minutes.
blinking
blinkingblinking
– – – – – – – – – –
6
BRIGHT
RECORDING
Basic Recording (Cont.)
Display
IND. ON/OFF
button
Select Dial
Brightness Control
You can adjust the brightness of the display by
rotating the Select Dial.
1
ADJUST BRIGHTNESS
Rotate the Select Dial until the brightness
indicator moves and the display reaches its
appropriate brightness.
•The brightness indication appears on the
display.
To Next Page
Loading...
Need help?
General
