52 EN
15°
15°
30°
30°
5m (16.4ft)
USING THE REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic operations
(Playback, Stop, Pause, Fast-Forward and Rewind) of your
VCR. This remote control unit makes additional playback
functions possible.
Installing The Battery
The remote control uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out the battery holder while pressing the knob as
shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to have
the “+” mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(Z pg. 2).
When using the remote control, be sure to
point it at the remote sensor. The illustra-
tion shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective
or may cause incorrect operation outdoors
or when the remote sensor is directly
exposed to sunlight or powerful lighting.
Transmitted beam
effective area
Remote sensor
1
1
3
2
Knob
To Next Page
Loading...
Need help?
General
