EN55
TW
PLAYBACK EFFECT
STROBE
CLASSIC FILM
MONOTONE
SEPIA
4
1
2
3
OFF
4
B
/
W
VIDEO ECHO5
P
L
A
Y
O
F
F
C
A
M
E
R
A
5
S
Power Switch
PLAY
EFFECT
EFFECT ON/OFF
PLAYBACK EFFECT
Select Menu
Remote sensor
Play (
4
) Button
RM-V713U
(provided)
FEATURE:
Playback Special Effects
PURPOSE:
To allow you to add creative effects to the playback
image. You can use any one of the 5 effects.
OPERATION:
1) To start playback, press PLAY (
4
).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
n To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
n To change the selected effect, repeat from step 2 of
the above “OPERATION”.
NOTES:
●
When some Playback Special Effects are used, the
Multi-Analyzer 4 and Multi-Analyzer 9 Snapshot
modes (
Z
pg. 26) are not available.
●
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo. The effects work the same in playback as they
did in recording. Refer to page 35 for more
information.
To Next Page
Loading...
Need help?
General
