JVC GR-DVX70A User Manual

EN21
BRIGHT
– – – – –
6 – – – – –
Journalistic Shooting
In some situations different angles of shooting may be
required for more dramatic results.
1
OPEN LCD MONITOR
Make sure the LCD monitor is fully open.
2
TILT LCD MONITOR
Tilt the LCD monitor in the most convenient
direction.
•The LCD monitor can rotate almost full circle (270°:
90° downward, 180° upward).
Interface Shooting
A person you shoot can view himself/herself in the LCD
monitor, and you can even shoot yourself while viewing
your own image in the LCD monitor.
1
TILT LCD MONITOR UPWARD
Open the LCD monitor and tilt it upward to 180
degrees so that it faces forward.
•The monitor image is inverted vertically. If the
viewfinder is pulled out at that time, it will also
switch on.
2
START RECORDING
Point the lens toward the subject (yourself when self-
recording) and start recording.
•During Interface Shooting, the “Tape Running”
indicator and warning indications (Z pg. 102 –
105) are the only ones that are shown; they appear
reversed in the display as they would when viewing
a mirror, but are not reversed in the recording.
NOTE:
The tape remaining indicator does not appear during
interface shooting. However, when the remaining time
reaches 2 minutes, the indicator appears showing the
remaining time: (blinking) (blinking)
(blinking)
Brightness Control
You can adjust the brightness of the display by rotating
MENU/SET.
1
ADJUST BRIGHTNESS
Rotate MENU/SET until the brightness indicator moves
and the display reaches its appropriate brightness.
•The brightness indication appears on the display.
•If the viewfinder is pulled out, it is also possible to
adjust its brightness.
MENU/SET
Dial
Self-Recording

JVC GR-DVX70A Specifications

General

Brand	JVC
Model	GR-DVX70A
Category	Camcorder
Language	English

Summary

Instructions

Safety Precautions

Warning: Fire or Shock Hazard

Crucial safety warning about exposing the unit to rain or moisture.

Warning: Lithium Cell Battery Hazard

Specific warning about potential fire or chemical burn hazards from the battery.

General Cautions

General cautionary advice for safe operation and handling of the device.

Getting Started

Power

Recording

Basic Recording For Video

Guide to performing basic video recording using the camcorder.

Basic Recording For Digital Still Camera (D.S.C.)

How to use the camcorder as a digital still camera for snapshots.

Focusing

Exposure Control

White Balance Adjustment

Playback

Basic Playback For Video

Basic Playback For D.S.C.

Basic Connections

Dubbing

Dubbing Tape to Tape

How to copy recorded video and audio from one tape to another.

Digital Dubbing Between Tapes

How to copy recorded scenes digitally between devices with DV connectors.

Dubbing Images from MultiMediaCard to Tape

Using The Remote Control Unit

Random Assemble Editing [R.A.Edit]

Audio Dubbing

Troubleshooting

No power is supplied.

Problem with power supply and its solutions.

Recording cannot be performed.

An error indication (E01 — E06) appears.

Troubleshooting specific error codes.

User Maintenance

Cleaning The Camcorder

Cautions

Battery Packs

Safety precautions for handling battery packs.

Main Unit Cautions

Additional safety precautions for the camcorder's main unit.

Specifications

Camcorder General Specifications

General technical specifications of the camcorder.

AC Power Adapter/Charger Specifications