23
123
456
789
0
123
456
789
0
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
● If using the RF connection (Z pg. 4), press TV/VIDEO.
The VCR's VIDEO indicator goes out and the TV
broadcast being recorded disappears.
● If using the AV connection (Z pg. 4), change the
TV's input mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" (Z pg. 15).
Recording
6
5/8
q
–
™
+
£
C.RESET
OSD
TV/VIDEO
To Next Page
Loading...
Need help?
General
