26
EN
INITIAL SETTINGS (cont.)
Tuner Set
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Turn on the unit.
Press
POWER
(
1
).
B
Select the VCR deck.
On the unit
Press
VCR/DVD
repeatedly so that the VCR indicator
lights up.
On the Remote
Press
VCR
so that the VCR indicator lights up.
C
Access the Main Menu screen.
Press
SET UP MENU
.
D
Access the Tuner Set screen.
E
Perform Auto Channel Set.
Press
rt
to move the
highlight bar (arrow) to
“AUTO CHANNEL SET”, then
press
OK
or
e
. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
●
When Auto Channel Set is
complete, “SCAN
COMPLETED” appears on the
TV screen.
●
If the scan was unsuccessful,
“SCAN COMPLETED–NO
SIGNAL–” appears on screen.
Check the connections and start
again.
F
Return to the normal screen.
Press
SET UP MENU
.
●
Turn on the TV and select the VCR channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of “BAND” on the Tuner Set
screen.
Press
rt
to move the
highlight bar (arrow) to
“TUNER SET”, then press
OK
or
e
.
To Next Page
Loading...
Need help?
General
