ENGLISH
31SETTINGS
Continued on the next page
Auto Answer
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
MSG Notice (message notice)
On *
1
: The unit informs you of the arrival of
a message by ringing and displaying
“Received Message.”
Off: The unit does not inform you of the arrival of
a message.
MIC (microphone setting)
Adjust the built-in microphone volume,
[Level 01/02/03].
PhoneBook
Load the phone book of the Bluetooth phone to the
unit. (You can load up to 50 phone numbers.)
• Before using this function, make sure that the
Bluetooth phone is connected.
Initialize
Yes: Initialize all settings you have made in the
Bluetooth menu.
No: Return to the previous screen.
Name
Name of the unit (as shown on Bluetooth devices).
Address
Address of the unit.
Version
Hardware and software versions of the Bluetooth
module.
Phone Device *
2
Name of the connected Bluetooth phone.
Audio Device *
2
Name of the connected Bluetooth audio player.
*
1
If the connected Bluetooth phone does not support
text message notification (via Bluetooth), the unit will
not receive any notification upon the arrival of a text
message.
*
2
Appears only when a Bluetooth phone/audio player is
connected.
Title assignment
You can assign titles to 30 station frequencies (FM and
AM) using 10 characters (maximum) for each title.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Select “TUNER.”
2 Show the title entry screen.
3 Assign a title.
1 Press number button 4 ( ) repeatedly
to select a character set.
2 Turn the control dial to select a character. (For
available characters, see page 32.)
3 Use 4 /¢ to move to the next (or
previous) character position.
4 Repeat steps 1 to 3 until you finish entering
the title.
EN30-37_KD-BT22_001A_f.indd 31EN30-37_KD-BT22_001A_f.indd 31 1/2/08 11:11:53 AM1/2/08 11:11:53 AM
To Next Page
Loading...
Need help?
General
