JVC KD-AV7001 User Manual

60
ENGLISH
To operate the car switches behind the
monitor, press and hold OPEN/CLOSE.
The monitor change its angle to the illustrated
position for about 30 seconds.
To return to its
previous angle
within 30 seconds,
press OPEN/
CLOSE again.
○○○○○○○○○
Removing the monitor
When detaching and attaching the monitor,
observe the following:
• Be careful not to drop the monitor.
• Be careful not to damage the connectors.
To detach the monitor
1
The monitor goes back into
its compartment if it has
been used, then comes out
halfway.
2
3
Insert the blind cover to protect the
internal mechanism from dust.
To attach the monitor
Insert the monitor into the compartment with
the screen facing down.
Hold
○○○○○○○○○
Changing the monitor position/
○○○○○○○○○
angle
You can change the monitor position and the
monitor angle.
• Once you change them, they are stored. The
monitor opens at the stored position and
angle, next time you eject the monitor.
To change the monitor position
To change the monitor angle
Each time you press the button, the monitor
changes its angle step by step.
• By holding the button (+/–), you can easily
change the angle to its extreme (+/–).
AVOUT VOL
On the remote controllerOn the main unit
MAIN SUB
then
On the main unit
58-60_KD-AV7001[EE]f.p65 4/27/05, 12:57 PM60

JVC KD-AV7001 Specifications

General

Brand	JVC
Model	KD-AV7001
Category	Car Stereo System
Language	English