JVC KD-BT12 User Manual

ENGLISH
4 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 24 and 25.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK HOUR,” then adjust the hour.
Select “CLOCK MIN” (minute), then adjust the minute.
Select “24H/12H,” then “24 HOUR” or “12 HOUR.”
4
Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information of the current source
FM/AM Frequency
= Clock = (back to the beginning)
FM Radio
Data System
Station name (PS)
= Station Frequency = Programme type (PTY) = Clock = (back to the
beginning)
CD/CD-CH Audio CD/CD Text: Current track number with the elapsed playing time
= Current track
number with the clock time = Disc title/performer *
1
= Track title *
1
= (back to the
beginning)
MP3/WMA: Current track number with the elapsed playing time = Current track number with
the clock time = Album name/performer (folder name) *
2
= Track title (file name) *
2
=
(back to the beginning)
BLUETOOTH Current track number with the elapsed playing time
= Current track number with the clock
time = Album name/performer = Track title = (back to the beginning)
IPOD Folder name
= Track name = Current track number with the elapsed playing time = Current
track number with the clock time = (back to the beginning)
DAB Service name
= Ensemble name = Channel number = Frequency = Clock = (back to the
beginning)
*
1
If the current disc is an audio CD, “NO NAME” appears.
*
2
If an MP3/WMA file does not have Tag information or “TAG DISPLAY” is set to “TAG OFF” (see page 26), folder name
and file name appear.
EN02-07_KD-BT11_003B_ff.indd 4EN02-07_KD-BT11_003B_ff.indd 4 6/25/08 3:17:19 PM6/25/08 3:17:19 PM

JVC KD-BT12 Specifications

General

Brand	JVC
Model	KD-BT12
Category	Car Receiver
Language	English