ENGLISH
26
To show the Dynamic Label Segment (DLS) information
While listening to an ensemble that supports DLS....
• The DLS display will be temporarily canceled when you operate the unit.
Lights up when receiving a service providing
Dynamic Label Segment (DLS)—DAB radio text.
Listening to the iPod
You can play songs in an Apple iPod by:
– Connecting it with the USB cable supplied with your iPod to the USB cable from the rear of the unit.
– Connecting the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of
the unit.
Preparation: Make sure “Changer” is selected for the external input setting, see page 34.
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
Caution:
• Avoid using the iPod if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
1
—
Connect an iPod to the USB cable or through KS-PD100.
Playback starts automatically from where it had been paused previously.
• If an iPod has been connected, press SOURCE to select “USB-iPod” or “iPod” as
the playback source.
2
Select a track.
3
—
Adjust the volume and sound as you want. (See pages 29 – 31.)
EN24-31_KD-BT22[E]_003A_f.indd 26EN24-31_KD-BT22[E]_003A_f.indd 26 1/22/08 5:25:41 PM1/22/08 5:25:41 PM
To Next Page
Loading...
Need help?
General
