JVC KD-BT22 User Manual

ENGLISH
5INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 32 and 33.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4
Finish the procedure.
Changing the display information and pattern
When the power is turned off : Check the current clock time
Ex.: When tuner is selected as the source
Source operation display Audio level meter display
(see “LevelMeter” on page 32)
EN02-07_KD-BT22[E]_003A_f.indd 5EN02-07_KD-BT22[E]_003A_f.indd 5 1/22/08 5:23:51 PM1/22/08 5:23:51 PM

JVC KD-BT22 Specifications

General

MP3 playback	Yes
DVD Audio playback	No
FM band range	87.5 - 108 MHz
LW band range	144 - 279 kHz
Output power	50 W
Frequency range	16 - 20000 Hz
Audio output channels	4.0 channels
Equalizer bands quantity	5
Signal-to-Noise Ratio (SNR)	98 dB
File type	MP3/WMA/AAC