ENGLISH
7
When an FM stereo broadcast is hard to
receive
Reception improves, but the stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you want to
store into.
2
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Lights up when monaural mode is activated.
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
To tune in to a station manually
In step ! above...
1
2
Select a desired station frequency.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Continued on the next page
EN02-07_KD-747[EE]_2.indd 7EN02-07_KD-747[EE]_2.indd 7 12/3/07 4:03:00 PM12/3/07 4:03:00 PM
To Next Page
Loading...
Need help?
General
