13ENGLISH
Using the Bluetooth ® device
Bluetooth is a short-range wireless radio communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected
without cables and communicate with each other.
• Refer to pages i and ii at the end of the manual to check the countries where you may use the
Bluetooth® function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
HFP (Hands-Free Profile) 1.5 ; OPP (Object Push Profile) 1.1 ; PBAP (Phonebook Access Profile)
1.0 ; A2DP (Advanced Audio Distribution Profile) 1.2 ; AVRCP (Audio/Video Remote Control
Profile) 1.3
Refer also to the instructions supplied with the Bluetooth device.
Preparation:
• Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the
unit.
• Operate the device to turn on its Bluetooth function.
~
]
Turn on the power.
Ÿ
or
Only one USB Bluetooth Adapter can be detected at a time.
Pairing a device
When you connect a Bluetooth device to the unit for the first time, make pairing between the unit
and the device.
• Once the connection is established, it is registered in the unit even if you reset the unit. Up to five
devices can be registered in total.
• Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time.
USB input terminal
KS-UBT1
USB cable from the
rear of the unit
EN12-21_KD-R711_003A_5.indd 13EN12-21_KD-R711_003A_5.indd 13 12/17/09 5:24:04 PM12/17/09 5:24:04 PM
To Next Page
Loading...
Need help?
General
