7ENGLISH
Manual search
“M” flashes, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
]
<TUNER>
]
<MONO>
]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
]
<TUNER>
]
<SSM>
]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
“SSM” flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
Main unit
Remote
controller
General operation
Selects the sound mode.
• Enters tone level adjustment directly ( 23) if pressed and held
EQ/BASS-TRE on the main unit.
—
• Enters “Call Menu” screen or answers incoming call when the unit
rings.
• Ends a call if pressed and held.
—
• Activates/deactivates TA Standby Reception.
• Enters PTY Searching mode if pressed and held.
• Returns to the previous menu.
—
Power off : Checks the current clock time.
Power on : Changes the display information.
[Hold]
[Hold]
[Hold]
Listening to the radio
~
]
“FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast
with sufficient signal strength.
EN02-11_KD-R711_003A_5.indd 7EN02-11_KD-R711_003A_5.indd 7 12/17/09 5:23:54 PM12/17/09 5:23:54 PM
To Next Page
Loading...
Need help?
General
