JVC KD-R720 User Manual

Troubleshooting
•
Symptom
Remedy/Cause
Sound cannot be heard from the speakers.
Adjust the volume to the optimum level. / Make sure the unit is not
muted/paused. (page 6) / Check the cords and connections.
The unit does not work at all.
Reset the unit. (page 3)
"EXT IN/ AUX IN" cannot be selected.
Check the <SRC SELECT> setting. (page 27)
-
~
Sound is sometimes interrupted while
Check to be sure the recommended stereo mini plug is used for
Q)
c
Q)
listening to an external component
connection. (page 23)
~
connected to the auxiliary input jack.
Nothing appear on the display.
Check the <COLOR SETUP> setting. (page 25)
The correct characters are not displayed This unit can only display letters (upper case), numbers, and a
(e.g. album name).
limited number of symbols.
2
SSM automatic presetting does not work. Store stations manually.
«
Static noise while listening to the radio.
Connect the antenna firmly .
........
2
u..
Check the <SRC SELECT> .... <AM> setting. (page 27) "AM" cannot be selected.
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back and
Insert a finalized CD-R/CD-RW (finalize with the component which
track cannot be skipped. you used for recording).
~
Disc sound is sometimes interrupted.
Stop playback while driving on rough roads. / Change the disc. /
u
ru
.D
Check the cords and connections.
>.
ru
Q
"NO DISC" appears on the display. Insert a playable disc into the loading slot.
u
Vl
is
"PLEASE" and "EJECT" appear alternately
Press ..., then insert a disc correctly.
on the display.
"IN DISC" appears on the display.
The disc cannot be ejected properly. Make sure nothing is blocking
the loading slot.
Disc cannot be played back.
Use a disc with MP3/WMA tracks recorded in a format compliant
with ISO 9660 Levell, Level 2, Romeo, or Joliet. / Add the extension
code <.mp3> or <.wma> to the file names.
~
Noise is generated.
Skip to another track or change the disc.
u
co
.D
"READING" keeps flashing on the display.
A longer readout time is required. Do not use too many hierarchical
>.
ru
Q
levels and folders.
«
2
T racks do not play back in the order you
The playback order is determined when the files are recorded.
S
........
have intended them to play .
(Y)
0....
2
The elapsed playing time is not correct.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
"NOT SUPPORT" appears and track skips. Skip to the next track encoded in an appropriate format or to the
next non-copy-protected WMA track.
28 I ENGLISH

JVC KD-R720 Specifications

General

Brand	JVC
Model	KD-R720
Category	Car Receiver
Language	English