20 ENGLISH
Listening to the other external components
Connecting an external component to the AUX input jack
3.5 mm stereo mini
plug (not supplied)
Portable audio player,
etc.
Recommended to use a 3-terminal plug head
stereo mini plug for optimum audio output.
You can connect an external component to the AUX (auxiliary) input jack on the control panel.
Preparation:
Make sure <Show> is selected for the <Source Select>
=
<Aux Source> setting. (page 25)
• For details, refer also to the instructions supplied with the external components.
~
]
“AUX IN”
!
]
Adjust the volume.
Ÿ
Turn on the connected component
and start playing the source.
⁄
Adjust the sound as you want. (page 21)
Additional information
• Made for
iPod touch (1st, 2nd, 3rd, and 4th generation)
iPod classic
iPod with video * (5th generation)
iPod nano (1st *, 2nd, 3rd, 4th, 5th, and 6th generation)
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
*
<iPod Mode/ Application Mode> are not available.
• It is not possible to browse video files on the “Videos”
menu in <Headunit Mode>.
• The song order displayed on the selection menu of this
unit may differ from that of the iPod.
• This unit can display up to 128 characters (ASCII code).
• When operating an iPod/iPhone, some operations may
not be performed correctly or as intended. In this case,
visit the following JVC web site: <http://www.jvc.
co.jp/english/car/index.com> (English website only).
EN02-29_KD-R826BT_001A_f.indd 20EN02-29_KD-R826BT_001A_f.indd 20 1/26/11 4:48:11 PM1/26/11 4:48:11 PM
To Next Page
Loading...
Need help?
General
