ENGLISH
14
You can perform the following operations from
the <SET UP> menu.
• Pairing and delete pairing
• Connect and disconnect a registered Bluetooth device
(Phone/Audio)
<Bluetooth> <Device> = Perform
the following operations.
Pairing and PIN code
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate with each other.
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth
device you want to connect.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
[Turn] = [Press]
Connecting a Bluetooth device for the first time
Preparation:
• Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit.
• Operate the device to turn on its Bluetooth function.
1
Turn on the power.
2
Connect the USB Bluetooth Adapter,
KS-UBT1.
• Only one USB Bluetooth Adapter can be
detected at a time.
KS-UBT1
USB cable from the rear
of the unit
or
EN10-17_KD-R905_001A_f.indd 14EN10-17_KD-R905_001A_f.indd 14 3/4/09 9:24:56 AM3/4/09 9:24:56 AM
To Next Page
Loading...
Need help?
General
