21
ENGLISH
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 OFF
BEAT Rock or +02 00 ON
disco music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
below.
• To adjust the bass and treble reinforcement levels
or to turn on/off the loudness function, see page 20.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
1
Call up the sound mode you want to
adjust.
• See page 20 for details.
2
Select “BAS” (bass), “TRE” (treble),
or “LOUD” (loudness).
3
Adjust the bass or treble, or turn the
loudness function on/off (LOUD ON/
LOUD OFF).
4
Repeat steps
2
and
3
to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step
1
flashes on the display.
Your adjustment made for the
selected sound mode is stored
in memory.
6
Repeat the same procedure to store
other sound modes.
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
the left column.
SCM
SCM
SEL
EN20-21_KD-S743R[E_EX]f.p65 11/18/02, 6:37 PM21
To Next Page
Loading...
Need help?
General
