JVC KD-SH77R User Manual

ENGLISH
35
3 Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4 Select a service you want to listen to.
1 Press M/B (mode/band).
2 Press ¢ or
4 to select a service
you want.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to change the display information,
press D (display).
Each time you press the button, the following
information appears on the display for a while.
To tune into a particular ensemble without
searching:
1 Press SOURCE to select DAB tuner as the
source.
2 Press and hold M/B (mode/band) for more than
1 second repeatedly to select the DAB band
(DAB 1, DAB 2 or DAB 3).
3 Press and hold ¢ or 4 for more
than 1 second. “MANUAL” flashed on the
display.
4 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the ensembles
keep changing until you release the button.
Ensemble name
Service name
Channel number
Frequency
Press ¢ to
search ensembles of
higher frequencies.
Press 4 to search
ensembles of lower
frequencies.
Within
5 seconds
EN34_37KD-SH77R/55R[E] 2/9/01, 3:58 PM35

JVC KD-SH77R Specifications

General

Brand	JVC
Model	KD-SH77R
Category	Car Receiver
Language	English