18
ENGLISH
Refer also to “CD OPERATIONS” on pages
12 to 15.
Playing an MP3 disc
1
Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD (CD-CH) turns on the unit and
starts playback automatically.
2
Insert an MP3 disc into the loading
slot.
The unit turns on,
draws the disc and
starts playback
automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3 OPERATIONS
* When “CLOCK” is set to “ON” (see page 27),
the current indication will soon change to the
clock time.
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appears. (See also page 19.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 folders and
144 MP3 files
MP3 indicator
CD–in indicator
Current source
indication*
Total file
number
Total folder
number
EN16-22KD-SX9350_990[J]f.p65 12/27/02, 5:34 PM18
To Next Page
Loading...
Need help?
General
