JVC KD-SX990 User Manual

9
ENGLISH
RADIO OPERATIONS
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching a station manually:
Manual search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Press and hold ¢ or 4
until “MANU” (manual) starts
flashing on the display.
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
* When “CLOCK” is set to “ON” (see page 27),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2 Start searching a station.
When a station is received, searching stops.
Selected band appears*.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
To search stations of
higher frequencies
To search stations of lower frequencies
CONTINUED ON THE NEXT PAGE
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
FM 1
(F1)
FM 2
(F2)
FM 3
(F3)
A M
EN09-11KD-SX9350_990[J]f.p65 12/27/02, 5:24 PM9

JVC KD-SX990 Specifications

General

Brand	JVC
Model	KD-SX990
Category	Car Receiver
Language	English