JVC KD-SX990 User Manual

19
ENGLISH
To stop play and eject the disc
Press 0.
Playback stops and the control panel flips down.
The disc automatically ejects from the loading
slot.
To change the display information
While playing back an MP3 file,
you can change MP3 disc
information shown on the display.
Each time you press DISP
(display), the display changes to
show the following:
• When “TAG DISP” is set to “TAG ON”
(initial setting: see page 28)
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the
TAG indicator will not lights up on the display.
• When “TAG DISP” is set to “TAG OFF”
Note:
The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 28.
Press ¢ briefly
while playing, to skip
ahead to the beginning of
the next file.
Each time you press the
button consecutively, the
beginning of the next files
is located and played
back.
Locating a file or particular
portion on an MP3 disc
For “MP3 playback/search order” see page 17.
To fast-forward or reverse the file
To skip to the next or previous files
Press 4 briefly, while playing, to skip back
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
Press and hold 4 while playing an MP3
disc, to reverse the file.
Press and hold ¢
while playing an MP3 disc,
to fast-forward the file.
Album name / performer
(folder name*)
(TAG lights up on the display)
Track title (file name*)
(TAG lights up on the display)
Elapsed playing time and
Current file number
Folder name
( lights up on the display)
File name
( lights up on the display)
Elapsed playing time and
Current file number
EN16-22KD-SX9350_990[J]f.p65 12/27/02, 5:34 PM19

JVC KD-SX990 Specifications

General

Brand	JVC
Model	KD-SX990
Category	Car Receiver
Language	English