JVC KD-X200 User Manual

I
I Wiring connection
JVC Amplifier
Remote
wire*
1
.................. ! ....
I tiiJ Ignition switch I
--~-~11/-
:,/
Join the same color wires
together.
Blue/white:
Remote (200
mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: 12 V Battery
Red: 12 V Ignition switch
Black: Ground
White: Front speaker (left)
Make this
White/black
connection if your Gray: Front speaker (right)
vehicle factory
wiring harness does Gray/black
not have "12 V Green: Rear speaker (left)
ignition switch"wire. 111~============:::::::
Green/black
Purple:
Rear speaker (right)
Purple/black
*1 Not supplied for this unit.
If you have any troubles, try the following:
1 Check 'Troubleshooting" (~page 17).
2
Reset the unit.(~ page 2)
3 Contact (USA only)
Call: 1-800-252-5722 (or) visit: http://www.jvc.com
Installation/Connection
Factory wiring
harness (vehicle)
ENGLISH I 21

JVC KD-X200 Specifications

General

Brand	JVC
Model	KD-X200
Category	Car Receiver
Language	English