ENGLISH
31
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
References
KD-X272BT:
Main display
Clock display
Source name Display information: Main
FM/AM/SW1/SW2 Frequency
Frequency with Music Synchronization Effect* Date
back to the beginning
For FM Radio Data System stations only:
Station name/Program type
Station name/Program type with
Music Synchronization Effect*
Radio text Radio text+
Radio text+ song title/Radio text+ artist
Frequency Date
back to the beginning
USB For MP3/WMA/WAV/FLAC files:
Song title/Artist
Song title/Artist with Music Synchronization
Effect*
Album title/Artist Folder name File name Playing
time
Date back to the beginning
SPOTIFY BT Context title
Context title with Music Synchronization Effect*
Song title
Artist Album title Playing Time Date back
to the beginning
BT AUDIO Song title/Artist
Song title/Artist with Music Synchronization
Effect*
Album title/Artist Playing time Date back to the
beginning
AUX Source name
Source name with Music Synchronization Effect*
Date
back to the beginning
* During Music Synchronization Effect, the brightness level of the buttons changes and
synchronizes with the music level.
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power on
again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCESELECT] setting. (Page 6)
The unit does not work
at all.
Reset the unit. (Page 4)
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers, and a
limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
USB/iPod
Playback order is not as
intended.
The playback order is determined by the file name (USB).
Elapsed playing time is not
correct.
This depends on the recording process earlier (USB).
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format.
(Page 29)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the device (USB/iPod/iPhone).
Troubleshooting
JS_JVC_KD_X472BT_M_EN_2.indd 31JS_JVC_KD_X472BT_M_EN_2.indd 31 5/30/2019 9:07:09 AM5/30/2019 9:07:09 AM