JVC KW-ADV64BT User Manual

27
ENGLISH
Setting iPod control mode
Select the unit controlling iPod/iPhone playback.
When the source is “
iPod ”...
1
2
Head Controls playback from this unit.
( page 28)
iPod Controls audio/video playback from
the iPod/iPhone.
• Playback information is shown.
iPod
Out *
Displays the menu and playback
screen output from iPod/iPhone.
(page 29)
• You can control playback from
this unit in the same way as on
the iPod/iPhone.
• When using iPod nano (1st Generation) or iPod
with video (5th Generation) with <iPod> selected
for <iPod Control>, select <iPod> for <AV
Input> and connect iPod using KS-U30 (separately
purchased). (page 26)
* <iPod Out> is available only for the following iPod/
iPhone models:
– iPod nano (6th Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPhone 4
– iPhone 3GS
– iPhone 3G
Selecting preference settings
for iPod/iPhone playback
When the source is “ iPod ”...
1
2
Audiobooks Select the speed of audio books.
Artwork Shows/hides the iPod artwork.
Notice:
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following JVC web site: <http://
www3.jvckenwood.com/english/car/> (English
website only)
For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
EN_KW-AV60JJW.indb 27 11/12/12 16:19

JVC KW-ADV64BT Specifications

General

Brand	JVC
Model	KW-ADV64BT
Category	Receiver
Language	English