46
ENGLISH
Go to other menu items
To register using <Open>
3
4
Change the PIN code.
• You can enter any number you like (1-digit to
16-digit number).
• If you skip changing PIN code, press [Enter].
[BS]: Erases the character before the cursor.
[Del]: Erases the character on the cursor.
Operate the Bluetooth device to
connect while
“Open...” is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
PIN Code
Back
Enter
Exit
PIN code (initial: 0000)
To register using <Search>
3
The unit searches for available devices and displays
the list of them. (If no available device is detected,
“Device Unfound” appears.)
4 Select a device you want to connect.
5 Enter the specific PIN code of the device
to the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
6 Operate the Bluetooth device to connect
while “Connecting...” is displayed on the
screen.
Back
Exit
Open Connect
Back
Exit
Bluetooth
Dial Menu
Message
Open
Search
Special Device
Connect
NEW DEVICE
Bluetooth
1 Make sure “NEW DEVICE” is selected. If not, press [5] or [∞] to select it. ( 48)
2
Now connection is established and you can use the device through the unit.
• The device remains registered even after you disconnect the device. Use <Connect> (or activate <Auto
Connect>,
52) to connect the same device from next time.
EN_KW-AVX838[J]6.indb 46 10.1.18 5:42:54 PM
To Next Page
Loading...
Need help?
General
