JVC KW-AVX830 User Manual

6
ENGLISH
5 Remote sensor
6 Prox./Motion sensor ( 8)
7 • Displays <AV MENU> screen. ( 7)
8 • Selects the source.
• Turns on the power.
9 • Change the source to “ USB ” or “ iPod .”
• Selects the iPod control mode. (Hold) (
19)
p • Displays <Open/Tilt> screen. ( See below.)
• Ejects the disc and display <Open/Tilt>
screen. (Hold)
• Closes the monitor panel if pressed when the
panel is open.
1 Resets the unit. ( 3)
2 • Turns on the power.
• Attenuates the sound.
• Turns off the power. (Hold)
3 • Changes the display information.
– Each time you press DISP, the display changes
to show the various information.
• Available display information varies among
the playback sources.
– The following screens are displayed only when
they are ready:
• Dual
play screen (only for KW-AVX838/KW-
AVX830) (
28)
• Navigation screen (
27)
4 • Adjusts the audio volume.
– You can also adjust the volume by moving
your finger on the touch panel as illustrated.
Basic operations on the monitor panel
Screen (touch panel) Monitor panel
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower
the volume before playing these digital
sources to avoid damaging the speakers by
sudden increase of the output level.
<Open/Tilt> screen
[Open] Opens the monitor panel.
[Eject] Ejects the disc.
[Close] Closes the monitor panel.
[Tilt +/–] Tilts the monitor panel.
[Detach] To detach the monitor panel.
(
5)
[Exit] Goes back to the current source
screen.
Open
Eject
Close
Tilt +
Tilt –
Exit
Open/Tilt
Detach
EN_KW-AVX838[J]6.indb 6 10.1.18 5:42:30 PM

JVC KW-AVX830 Specifications

General

Brand	JVC
Model	KW-AVX830
Category	Car Video System
Language	English